Commercial
Vehicle Brake Blocks
|
|
. |
| · |
BT2
High volume brake block drilling
machine. It has been developed for production up to 1000 pieces per
hour. Designed to be part of turn-key block finishing operation. |
| · |
BU-NC
Standard Over 200 of these
machines have been installed worldwide. Developed primarily for
brake blocks. Quick change-over, versatile machine. Maximum
change over time is 90 minutes, min 15 minutes. |
| · |
BU-NC In
Line Same as BU-NC
Standard, with adaptations and conveyors to connect to grinding and
painting/marking equipment. |
|
. |
Automotive
and C.V. Brake
Linings
|
|
. |
| · |
BU-NC Standard Same
machine for brake blocks with modifications to drill brake linings. |
| · |
BU-CAR
This machine has been developed especially for passenger car
linings. The most important advantages are the quick change over
times (max 1 hour) and the high production rate of 1000 pieces per hour. |
|
. |
| Clutch
Facings |
|
. |
| · |
KU-NC
A versatile clutch facing drilling machine capable of drilling nearly all
known types of clutch facings with outside diameters from 150mm to
500mm. |
| · |
KF Clutch facing drilling machine designed for high volumes, up to 800 pieces
per hour. Instead of multi-spindle drilling heads, the KF has a
fixed head drilling all holes in one pass. |